鋁板生產廠家精整線擁有兩條現代化的連接精整生產線，包括兩條更新的連續退火剪和一條卷涂機生產線，以及一些傳統的設備，如張力矯直機、除油剪、分切剪、飛剪和間歇式退火爐。
　　The finishing line of aluminum plate manufacturer has two modern connecting finishing lines, including two latest continuous anneal shears and one roll coating machine production line, as well as some traditional equipment, such as tension leveler, oil removal shears, slitting shears, flying shears and intermittent annealing furnace.
　　為了提高自己的產品在市場上的聲譽，鋁板廠家在生產過程中使用了大量的檢驗設備來保證產品的質量。以下是一些測試設備的例子:
　　In order to improve the reputation of their products in the market, aluminum plate manufacturers use a large number of inspection equipment to ensure the quality of products in the production process. Here are some examples of test equipment:
　　(1)在剪切機上使用激光或普通光電探測器檢查板材表面缺陷。

　　(1) Use laser or ordinary photoelectric detector to check the surface defects of the plate on the shearing machine.
　　(2)終點線安裝x射線測厚儀和日變化測厚儀。
　　(2) X-ray thickness gauge and daily change thickness gauge shall be installed at the terminal line.
　　(3)超聲波分層探傷儀。
　　(3) Ultrasonic layer detector.
　　(4)聯合生產線采用熒光x射線全鉻儀檢測化學轉化板。
　　(4) In the joint production line, fluorescent X-ray total chromium instrument is used to detect the chemical conversion plate.
　　(5)采用壓力傳感器為測量元件的板弧度測量儀。
　　(5) Plate radian measuring instrument with pressure sensor as measuring element.
　　(6)帶CCD反射探測器的板寬計。
　　(6) Plate width meter with CCD reflection detector.
　　(7)線圈長度側規配同步電機。
　　(7) The coil length side is equipped with synchronous motor.
　　(8)使用卷材涂布生產線上的涂布濕度計。
　　(8) Use the coating hygrometer on the coil coating line.
　　以上是鋁板生產廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.baihuiplaza.comThe above is the relevant content introduced by the aluminum plate manufacturer for you. To learn more, please visit the website: http://www.jndclyxgs.com